Heated tubing is an accessory that goes hand in hand with the AirSense 11 CPAP machine for those who own it. This is specially intended for use during CPAP therapy, to provide warmed and humidified air while minimizing problems such as rainout and dry airways. For the new comers in this type of technology, the knowledge of the ways on how to install the heated tubing and the right techniques on how to use this equipment will boost their morale in accomplishing their therapy needs. The present article also contains detailed guidelines on how to install and set up the ResMed AirSense 11 Heated Tubing.
Step 1: Unboxing Your ResMed AirSense 11 Heated Tubing
If you have recently got your ResMed AirSense 11 Heated Tubing, let me give you some guidance on what you should do when you unpack it. The heated tubing that is usually contained in the package has a smooth and flexible appearance to it, and the other end is connected to an electrical supply. When using the parts make sure that they are well functioning as you prepare to install them.
Step 2: Connecting the Tubing to the AirSense 11 Machine
Locate the Tubing Port:
First, locate the tubing port of your AirSense 11 CPAP device. This is generally a part of the rear section of the device and principally contours to the connector of the heated tubing.
Attach the Tubing:
Push the end of the ResMed AirSense 11 Heated Tubing with the electric connector over the tubing port of the CPAP machine. Take the connector and push it into the port until it snaps into the correct position. The link has to be conscious but not overly tight. Such a connection makes sure that both, the air and the electrical signals from the CPAP machine reach the tubing.
Connect the Other End to the Mask:
The other end of the heated tubing normally with no electrical connector should fit with your CPAP mask. Secure the tubing by sliding it onto the mask’s hose connector such that it is well fixed. The connection it makes is to guarantee that only hot and humidified air gets into your mask but it will not leak.
Step 3: Powering Up and Adjusting Settings
Turn on the AirSense 11 Machine:
If the tubing is connected, turn on your AirSense 11 machine. The device will be incorporate an integration that will allow it to sense the presence of the heated tubing and act appropriately.
Adjust Temperature Settings:
The ResMed AirSense 11 Heated Tubing has also a unique feature where you can adjust the air temperature to suit your desire. Move to the setting interface that is exhibited on the machine’s screen, herein you find the settings that optimize the tubing temperature. Try changing your environment, and test for an environment with the best suited temperature for your therapy. The Auto Climate Control can also be switched on to automatically regulate the temperature according to the climate of the room.
Step 4: Using the Heated Tubing
After the power is supplied as well as getting the preferred temperature, then you are set to use the ResMed AirSense 11 Heated Tubing. Before going to bed, you should lie down and arrange the tubing in such a way no kinks or obstructions are present. The tubing should also be suspended with the help of a hose lift or tubing holder on top, so that the air circulation enhances, and there is no pressure on the connectors.
Step 5: Maintenance and Cleaning
Regular Cleaning:
In order to prevent damage of the ResMed AirSense 11 Heated Tubing and keep it used for as long as possible, it is crucial to clean it on a regular basis. Remove the tubing connection with both the machine and the mask used in CPAP. Thus, with warm, soapy water, wash on the inside and outside the tubing, preferably in a gentle way. Wash off the soap that had been applied and ensure that there is no deposition of any soap on the surface of the tubing, then let the tubing to dry on its own so that it can be connected again to the machine.
Inspect for Wear and Tear:
After some period of time, the tubing may become defective, in other words it may develop cracks or it may become stiff. It is also recommended to perform the inspection of the tubing and check if there is any damage or not. As with all therapies, if you find that you are experiencing any problems it may be time to replace the tubing to ensure optimum treatment.
Step 6: Troubleshooting
If you have a problem with your ResMed AirSense 11 Heated Tubing for example, the tubing is not warming appropriately, then first of all verify connections are properly connected. Further, ensure that the specific temperatures which are on the CPAP machine are set at the right level. If you continue to experience these issues, refer to the user handbook or call ResMed service provider.
Conclusion
The ResMed AirSense 11 Heated Tubing is a worthy an important accessory that can make the CPAP treatment more comfortable and efficient. If you follow these instructions carefully, this will allow you to have an accurate installation, maintenance and usage of the tubing which will lead to better therapy. Attending to the ResMed AirSense 11 Heated Tubing will give you the required warm, humidified air to enable you to have a sound sleep at night.
